Polycom DOC2585A - Manual (Page 126)

Chapter 3- Audio Only Basic Configuration and Operation
3-50
H.323 participants can bypass the Entry Queue IVR voice messages by
adding the correct Conference ID of destination conference to the initial
dial string:
[
Gatekeeper Prefix][EQ ID][##Destination Conference ID]
Example:
Conference ID
1001
 H.323 participants dial 9251000##1001
H.323 participants can also bypass the conference IVR voice messages by
adding the Conference Password to the initial dial string:
[Gatekeeper Prefix][EQ ID][##Destination Conference
ID][##Password]
Example:
Conference ID
1001
Conference Password 34567
 H.323 participants dial 9251000##1001##34567
SIP Participants
Using an Entry Queue minimizes the number of conferences that require
registration with the SIP server and enables using one URI address for all
dial-in connections, using the format:
<Entry Queue routing name>@<domain name>
Example:
Entry Queue Routing Name
DefaultEQ
Domain Name polycom.com
 SIP participants dial [email protected]
ISDN and PSTN Participants
Up to two dial-in numbers can be allocated to an Entry Queue for use by
ISDN and PSTN participants.
Calls to numbers within the ISDN and PSTN Dial-in Range that are not
allocated to an Entry Queue are routed to the Transit Entry Queue.
Dial-in ISDN and PSTN participants dial one of the dial-in numbers
assigned to the Entry Queue, including the country and area code (if
needed).
They are routed to their conference according to the conference ID.