Polycom DOC2585A User Manual
Page 37
Advertising
Polycom RMX 1500/2000/4000 Getting Started Guide
2-7
4
Remove the boxes and top Stratocell® and open the anti-static plastic
bag wrapping the RMX.
5
Holding the handle on each side, lift the RMX 4000 from the box, and
place it on a flat surface or in a rack. Remove any packaging material
prior to positioning the RMX 4000.
Attention:
Two people are required to lift the MCU out of the box and when installing it in a
rack.
Write down the RMX’s serial number that is on a sticker on the back of the unit.
It will be needed for product registration later in the process.
Advertising