Pioneer DVR-510H - Manual (Page 47)

Recording 06
47
En
• Use the REC MODE button to set the recording
quality. Press repeatedly to switch between FINE , SP ,
LP and EP (and MN if manual recording mode is on).
• Press DVD to record to DVD disc, or HDD if you want
to record to the hard disk drive.
3 Use / / / (cursor buttons) to move the
cursor to the recording start date and time on the
grid.
• You can move the cursor forward or back an hour at
a time using the and buttons.
Each row of the grid is one day (you can set the timer
recording for up to a month in advance). Each column is
a 15 minute interval.
The darker area represents time that has already passed
and can’t therefore be selected. The lighter area is time
that’s available.
4 Press ENTER to set the start time.
The start date and time is displayed in the middle of the
screen.
• You can go back and reset the start time if you need
to by pressing RETURN .
5 Use the / (cursor left/right) to move the
cursor to the recording end time on the grid.
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to 6 hours can be set.
6 Press ENTER to set the end time and exit the
timer recording screen.
• You can check the timer program you just set from
the main timer recording screen (see Standard timer
recording on page 47).
Standard timer recording
The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
1 Press TIMER REC to display the Timer Recording
screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU , select Timer
Recording , then Timer Recording (View) ).
This screen shows all the timer programs currently set.
• The amount of free space available on the HDD and
the currently loaded recordable DVD is shown
towards the bottom of the screen.
• In the lower-right corner, the number of timer
programs already set is shown next to Tmr Pgms .
• Each row is for one timer recording program, with the
date and time information, frequency, channel,
recording mode, DVD or HDD and whether there’s
enough space to record.
• If there are more than eight timer programs already
set, press NEXT to switch page (go back using
the PREV button).
8: 00 9: 00 10: 00 11: 00 12: 00 1: 00 2: 00
12/13
12/14
12/15
AM PM
12/13 11:45
WED AM
- -:- -
FINE 32 HDD
Easy Timer Recording
CHANNEL +/– REC MODE HDD/DVD
Recording start time
Current time
11: 00 12: 00 1: 00 2: 00 3: 00 4: 00 5: 00
12/13
12/14
12/15
AM PM
12/13 11:45
WED AM
1:45
PM
FINE 32 HDD
Easy Timer Recording
CHANNEL +/– REC MODE HDD/DVD
Recording start time
Recording end time
HOME
MENU
ENTER
CLEAR
PREV NEXT
TIMER REC
ì
12/13 WED 7:00 PM 8:00 PM 32 FINE HDD OK
12/14 THU 9:00 PM 10:00 PM 43 FINE HDD OK
HDD Remain 10h20m(FINE)
DVD Remain 0h43m(FINE)
New Input
Date Start Stop CH Mode Rec to Result
1/1
Timer Recording
DVR-03_HDD_KU.book 47 ページ ２００３年８月７日 木曜日 午前１０時４０分