Tuner settings, The initial setup menu 13 – Pioneer DVR-510H User Manual

Page 90

Advertising

The Initial Setup menu

On Screen Display

• Default setting:

On the default setting, the recorder shows on-screen
operation displays (

Play, Stop

and so on). Change to

Off

to hide these displays.

Front Panel Display

• Default setting:

On the default setting, the time is shown in the front
panel display when the recorder is in standby. Switch to

Off

to have the front panel display switch off completely

when in standby.

Note

• When set to

Off

, the display still lights dimly in

standby when setting a timer recording, or during
Auto Start Recording.

Remote Control Set

• Default setting:

Recorder1

You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.

So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.

There are three different recorder IDs. When set to

Recorder2

Recorder3

, the remote control mode is

shown in the front panel display.

Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the remote
to the same ID.

To set the remote, press and hold

RETURN

and a number

button (

) until the indicator on the remote lights.

Setup Navigator

• Default setting:

n/a

The Setup Navigator appears automatically when you
switch on the recorder for the first time (or after resetting
the recorder). It is also available from the Initial Settings
menu should you need it at any other time.