Pioneer DVR-510H - Manual (Page 92)

The Initial Setup menu 13
92
En
Video Out settings
Component Video Out
• Default setting: Interlace
You only need to make this setting if you connected this
recorder to your TV using the component video jacks.
If your TV is compatible with progressive-scan
component video, set this
Progressive for the highest
quality picture. If your TV is not compatible with
progressive-scan video, leave it set to
Interlace .
See also Progressive scan video in the glossary on
page 112.
Important
• If you switch to Progressive when using a TV that is
not compatible with progressive-scan video, you will
not be able to see anything displayed on your TV. If
this happens, press and hold
PAUSE on the front
panel, then press HDD/DVD . This will set the
recorder’s video output back to Interlace .
Audio In settings
External Audio
• Default setting: Stereo
If the external source is standard stereo, leave set to
Stereo . If each channel carries a separate soundtrack,
change to Dual Mono .
When the external audio is from the DV input, an audio
subcode channel within the DV audio tells the recorder
whether the audio is stereo or dual mono. This has
priority over the setting you make here.
Dual Mono Recording
• Default setting: L
When recording a dual mono source from an external
input in Video mode or VR mode set to
FINE / MN 32 , you
can choose to record either the L (left), or the R (right)
audio channel.
Note
• If you’re recording in VR mode (except when set to
FINE / MN 32 ), both channels will be recorded and
you can switch them as you like on playback.
Compatibility of this unit with progressive-scan TVs
Consumers should note that not all high-definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 525 progressive scan
picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output (
Interlace ). If there
are questions regarding our TV set compatibility with this model,
please contact our customer service center.
This recorder is compatible with the following Pioneer displays
and monitors
Plasma display
• PDP-502MX, PDP-505HD, PDP-5030HD, PDP-4330HD,
Pro-1000HD, Pro-800HD, PDP-5031, PDP-4300
Projection monitor receiver
• SD-532HD5, SD-533HD5, Pro-700HD, Pro-710HD, Pro-610HD,
Pro-510HD, Pro-720HD, Pro-620HD, Pro-520HD, Pro-730HD,
Pro-630HD, Pro-530HD, SD-582HDS, SD-641HDS, SD-643HDS
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback Component Video Out Interlace
Progressive
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback External Audio
Dual Mono Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3) Stereo
Dual Mono
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback External Audio
Dual Mono Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3) L
R
Initial Setup
DVR-03_HDD_KU.book 92 ページ ２００３年８月７日 木曜日 午前１０時４０分