Pioneer DVR-510H - Manual (Page 49)

Recording 06
49
En
Timer recording using the VCR Plus+
®
programming system
This system makes programming timer recordings very
simple. Most TV guides publish PlusCode numbers with
their program details. If you want to make a timer
recording of a program, you just input the corresponding
code. The date, start, stop and channel settings are made
automatically. All you have to do is tell the recorder the
recording mode, and whether it’s a once-only recording
or a regular recording.
1 Press ‘VCR Plus+’ to display the VCR Plus+
program screen.
You can also access this screen from the Home Menu
(press
HOME MENU , select Timer Recording , then VCR
Plus+ ).
• Use the number buttons to enter the PlusCode
number. (To clear the last digit entered, press
CLEAR .)
• Press REC MODE to change the recording quality
(see also Setting the picture quality/recording time on
page 44). If Manual Recording is on, then you can
also select the
MN setting.
• Use the / (cursor left/right) buttons to select the
Once , Daily or Weekly recording option.
• Press HDD to record to the hard disk drive, or DVD to
record to a DVD.
2 After making the settings, press ENTER.
The program details are shown at the bottom of the
screen for a few seconds then the screen is automatically
exited.
• If you haven’t set up the guide channels (or at least
the guide channel for the PlusCode number that you
entered), the recorder will prompt you to enter the
channel number that the TV program is showing on.
Tip
• You can check the timer program settings by
pressing TIMER REC to display the timer recording
screen.
VCR Plus+ programming with the power off
You can enter a PlusCode number when the recorder is
in standby. Note that the recording is always made to the
HDD. If you want to record to a DVD disc, you’ll need to
switch on the power and use the full VCR Plus+ program
screen.
Important
• You can’t use this feature until you have set up the
guide channels. See VCR Plus+ CH Setting on
page 91
• You can’t change the recording mode.
• You can’t program daily or weekly timer recordings.
HOME
MENU
HDD DVD
VCR Plus+
ENTER
CLEAR
REC MODE
ì
to input 3 9 9 2 4 0 9 PlusCode#
Rec Mode
Rec Times
VCR Plus+
MN21
Once Daily Weekly
REC MODE to change
to change level
to change
Rec to HDD HDD DVD to change
ENTER
CLEAR
VCR Plus+
DVR-03_HDD_KU.book 49 ページ ２００３年８月７日 木曜日 午前１０時４０分