Pioneer DVR-510H - Manual (Page 74)

Editing 08
74
En
Chapter Edit (Chpt Edit)
When editing VR mode DVDs or video on the HDD you
can edit individual chapters within a title, with
commands for erasing, combining and dividing. You can
also play individual chapters to check their content.
1 Select ‘Chpt Edit’ from the Disc Navigator menu
options.
2 Use the / / / (cursor buttons) to select the
title that contains the chapters you want to edit,
then press ENTER.
After selecting a title, thumbnails of each chapter appear
and you’ll see that the Disc Navigator menu items
change to the chapter editing commands:
• Erase – Erase chapters: Select the chapter you want
to erase and press ENTER (see also notes below).
• Divide – Split a chapter into two: Select the chapter
you want to divide and press ENTER (up to a limit of
999 chapters per disc).
• Combine – Combine two adjacent chapters into one:
Highlight the bar divider between two adjacent
chapters and press
ENTER (see also note below)
• Preview – Preview chapters: Select the chapter you
want to play; press STOP to return to the chapter
edit screen.
• Undo – Undo the last command (only works with VR
mode disc edits).
3 Press RETURN to get back to the menu options on
the left side of the screen.
4 To return to the Disc Navigator screen, press
RETURN again, or select ‘Back’ from the menu
options on the left.
Note
• It may not be possible to erase chapters less than 5
seconds long.
• It may not always be possible to combine two
chapters, even though they are adjacent. If a chapter
has been divided into three, then the middle chapter
erased, it is not possible to combine the two
remaining chapters into one.
Inserting chapter markers into a title
You can create new chapters within a title using the CHP
MARK button while playing the title or during recording.
This is useful not just for navigation of the disc content
but also for editing purposes.
1 Start playback of the title you want to create
new chapter markers in.
You can use the Play command from the Disc Navigator
menu to do this.
2 Press CHP MARK at any point where you want a
new chapter to begin.
A chapter marker icon appears on-screen briefly to
confirm a new chapter mark has been inserted:
• For greater control over the exact position of chapter
markers it can be useful to use the PAUSE button
and/or the slow-motion and frame advance/reverse
controls (
/ ).
VR mode HDD
Original
DVD
1/1
Chapter Edit
Back
Erase
Divide
Combine
Preview
Undo
1 3
4 5 6
7 8 9
11/04Wed 12:30PM 2ch LP Title
1
Chapter
0h03m
2
Original
Chapter 1
Back
DVD
Divide Chapter
Erase
Divide
Combine
Preview
Undo
12/13Wed 3:00PM 2ch LP Title
1
Chapter
0h03m
1-1 0.02.12.00
Play Pause
Divide
Exit
VR mode HDD
CHP
MARK
PAUSE
DVR-03_HDD_KU.book 74 ページ ２００３年８月７日 木曜日 午前１０時４０分