Virtual key, function and macro, Editing a scancode remap – Psion Teklogix ISO 9001 User Manual
Page 115
WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual
97
Chapter 5: Settings
Scancode Remapping
The Remap Scancode dialog box is displayed.
•
Type the scan code in hexidecimal in the field labelled Scancode.
Note: The ‘Label’ field displays the default function of the scancode you
are remapping.
Virtual Key, Function And Macro
The radio buttons at the bottom of the dialog box allow you to define to what the
scan code will be remapped to: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when
the virtual key is sent. If No Force is selected, the shift state is dependent on whether
the shift state is on or off at the time the virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the
dialog box.
•
Choose Virtual Key>Function or Macro.
•
Choose a function from the Function list, and tap on OK.
Editing A Scancode Remap
•
In the Scancode Remapping tab, tap on the remap you want to edit.
•
Tap on the Edit button, and make the appropriate changes.
•
Tap on OK to save your changes.