Psion Teklogix ISO 9001 - Manual (Page 248)

Chapter 5: Settings
Tools Menu
230 WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual
5.35.5.1 Data Connection Configuration
Enable Automatic Connect
If the Enable automatic connect checkbox is checked (unchecked by default), the
Wireless WAN user interface will attempt to establish a packet data connection
whenever packet data is available (e.g. after resume from suspend without further
user interaction).
To activate the automatic connection mode:
• Tap on the OK button.
While automatic connection mode is enabled, the Connect Data button in the main
Wireless LAN dialog box changes to Disable Auto.
To close the currently active connection (if any) and disable the automatic
connection mode:
• Tap on Disable Auto .
Important: Automatic connection mode should not be used if applications
other than the Wireless WAN user interface (e.g. Connection
Manager) are expected to open and close connections.
If the automatic connection mode is enabled and another applica-
tion closes the packet data connection, the WWAN user interface
will immediately try to re-establish the connection.