6 lock – Psion Teklogix ISO 9001 User Manual
Page 122
Chapter 5: Settings
Lock
104
WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual
5.6 Lock
To protect the data stored in your WORKBOUT PRO, you can assign a password
that must be entered each time the unit is switched on.
•
Tap on Start>Settings, and then tap on the Lock icon.
Warning:
It is critical that you store your password in a safe place. If you
forget it, a ‘clean start’ must be performed by certified Psion Tek-
logix personnel. A clean start returns the hand-held to factory set-
tings. Only the data stored in a CF or SD memory card are
preserved.
•
Tap in the checkbox next to Prompt if device unused to turn on password
protection.
•
Choose the amount of time that the unit can remain idle before you are
prompted to enter your password.
•
In the Password type dropdown menu, choose the type of password you
prefer to assign. Simple PIN allows you to enter a minimum of four
numeric characters. Strong alphanumeric requires a minimum of 7 charac-
ters and must contain at least three of the following: uppercase and lower-
case alpha characters, numbers and punctuation.