Psion Teklogix ISO 9001 - Manual (Page 290)

Chapter 7: Peripheral Devices & Accessories
Installation–Chargers And Docking Stations
272 WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual
Psion Teklogix offers a variety of chargers and docking stations for the
WORKABOUT PRO. These include:
• AC Adaptor–Model No. PS1050-G1
• Cigarette Lighter Adaptor–Model No. WA3113-G2
• Single Battery Charger – Model No. WA3001-G1
• Quad Battery Charger – Model No. WA3004-G1
• Desktop Docking Station – Model No. WA4003-G2
• Quad Docking Station For 7527C-G2 – Model No. WA4204-G2
• Quad Docking Station For 7527S-G2 – Model No. WA4304-G2
7.4.1 Installation–Chargers And Docking Stations
When installing a charger or docking station, consider the following guidelines.
• Keep chargers and docking stations away from excessive dirt, dust and
contaminants.
• Chargers will not charge batteries outside an ambient temperature range
of 0° C to 45 °C (32° F to 113° F). It is recommended that the charger or
docking station be operated at room temperature
– between 18° C and 25° C
(64° F to 77° F) for maximum performance.
After unpacking your unit:
• Visually inspect the charger for possible damage.
• Install the IEC power cord and apply power.
7.4.2 Power Consumption Considerations
Check to ensure the mains circuit supplying chargers and/or docking stations is
adequate for the load, especially if several chargers and docking stations are being
powered from the same circuit.
• Quad charger – can consume up to 2A @ 120VAC or 1A @ 240VAC.
• Quad docking station – can consume up to 3A @ 120VAC or 1.5A @
240VAC.
7.4.3 Operator Controls
WORKABOUT PRO docking stations and chargers have no operator controls or
power switches.