Pioneer DV-S733A - Manual (Page 11)

11
En
2 Connecting Up
Home theater video connections
This player outputs video in a number of
different ways. Choose the one most suitable
for your system using the guide below.
Connecting D Video and S-Video
cables
D Video (DV-S733A only) and S-Video cables
will only plug in one way, so make sure the plug
is correctly lined up with the jack before
inserting. Be sure to fully insert for a good
connection.
S-Video or composite video?
S-Video should give a better picture, so if you
have an S-Video input, use it. S-Video cables
are available from any good audio/visual dealer.
Important
Before making or changing any rear panel connec-
tions, make sure that all components are switched off
and unplugged from the wall outlet.
AC IN
VIDEO
OUT
S-VIDEO
OUT
D1 / D2 OPTICAL IN
OUT
COAXIAL
SUB
WOOFER
CENTER SURROUND FRONT
1
P R P B Y
2
1
1
2
L
L
R
R
2
AUDIO OUT
(5.1CH) DIGITAL OUT CONTROL AUDIO OUT
(2CH)
COMPONENT VIDEO OUT VIDEO OUT
1
2
AC IN
If your TV has a component video input, we recommend using it
to connect directly to the COMPONENT VIDEO OUT of this
player. Use the standard 3-jack component video ouput (DV-
S733A only: you can also use the D1/D2 D-Video jack).
If a component input is not available to you, connect this player to your
TV or AV receiver using either the VIDEO or S-VIDEO jacks.
DV-S733A
DV-47A AC Inlet.