Pioneer DV-S733A - Manual (Page 42)

42
En
DVD Setup Menu 7
MPEG Out
• Default setting: MPEG
3 PCM
You only need to make this setting if you connected
the player to another component (AV amplifier,
etc.) using one of the digital outs.
If your AV amplifier (or other connected
component) is compatible with MPEG audio, set
this to MPEG, otherwise set it to MPEG
3 PCM
(MPEG audio is converted to more compatible
PCM audio). Check the manual that came with
the other component if you’re unsure whether it
is MPEG audio compatible.
—
—
—
—
—
V2 Video1 General A2 Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Audio1
Off
Dolby Digital
DTS
3 PCM
Down Sample On
MPEG
MPEG
3 PCM
2ch Area
SETUP
Digital Out
• Default setting: On
If at any time you need to switch off the digital
audio output, set this to Off, otherwise leave it
On. Note that you can’t switch on/off the
optical and coaxial outputs individually.
—
—
—
—
—
V2 Video1 General A2 Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Audio1
Off
Dolby Digital
DTS
3 PCM
Down Sample On
MPEG
3 PCM
On
Off
SETUP
SACD Playback
• Default setting: 2ch Area
SACD discs can be divided up into several
different areas – stereo audio, 5.1 channel
audio and, for hybrid SACDs, standard CD
audio. The SACD Playback setting enables you
to select which area of the disc you want to
play.
—
—
—
—
V2 Video1 General A2 Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Audio1
Off
Dolby Digital
DTS
3 PCM
Down Sample On
2ch Area
Multi-ch Area
CD Area
SETUP
Note
If you select an area that isn’t on the disc
loaded, a different area of the disc will play. For
example, if you choose standard CD audio but
the disc loaded is not a hybrid SACD, the stereo
SACD audio will play.
Virtual Surround
• Default setting: Off
If you connected your DVD player using only the
stereo analog outputs and set Audio Out (see
below) to 2 Channel, you can simulate surround
sound by setting Virtual Surround to TruSurround.
—
—
—
—
—
Audio2 Video1 Language General A1 V2
Exit Move
Virtual Surround
Legato PRO
Audio Out
Speaker Setting
Gain Setting
Hi-Bit
CD Digital Direct
Off
TruSurround
2Channel
Fix
On
Off
SETUP
Note
• There is no effect when the audio source is DVD-
Audio, DTS or 96 kHz LPCM or during CD, MP3
or SACD playback.
• The digital audio output level is reduced when
playing 2 channel Dolby Digital DVDs or Video
CDs with TruSurround selected. If you play a
multichannel Dolby Digital DVD with Dolby
Digital to PCM conversion (see page 41) and
TruSurround selected, there is no digital output.
• How good the surround effect is varies with the
disc.
TruSurround
TruSurround uses technology that simulates
multichannel surround sound using only two
speakers.