Pioneer DV-S733A - Manual (Page 17)

17
En
4 Getting Started
Î
DVD PLAYER
SET UP
STOP
ENTER
7
Using the Setup Navigator
Before playing any discs, we strongly recommend using the
Setup Navigator. This makes all the basic DVD player
settings for you.
1 Press STANDBY/ON to switch on.
Also turn on your TV and make sure that it is set to the correct
video input.
• The button on the remote switches the player between
standby and on.
• If a disc that’s already loaded starts to play, press
7 to stop it.
2 Press SETUP.
The Setup Navigator on-screen display (OSD) appears:
General A2 V2 Language Audio1 Video1
Exit Move Select
Setup using the Setup Navigator
Setup Navigator
Setup Navigator Start
Auto Start Off
SETUP ENTER
Navigate all of the following OSDs using these controls:
Joystick up/down – cursor up/down
ENTER – select the highlighted menu option
Joystick left – go back to the previous question.
The control possibilities for the current OSD are shown at the
bottom of each screen.
3 Select ‘Start’.
General A2 V2 Language Audio1 Video1
Exit Move Select
Setup using the Setup Navigator
Setup Navigator
Setup Navigator Start
Auto Start Off
SETUP ENTER
Remember
Press ENTER to select an option.
• If you decide you don’t want to use the Setup Navigator, select
Auto Start Off here instead.
Note
This remote is for the DV-
S733A. The buttons are the
same for the DV-47A.