Pioneer DV-S733A - Manual (Page 48)

48
En
DVD Setup Menu 7
Background
• Default setting: Black
This specifies what the screen shows when the
player is stopped.
—
—
—
—
—
Video2 A2 Language General Audio1 V1
Exit Move
Background
Video Adjust
Still Picture
On Screen Display
Angle Indicator
Pioneer Logo
Black
Auto
On
On
SETUP
Component Video
Compared to a standard interlaced TV picture, a
progressive scan TV is capable of stable, flicker-
free images.
Set only if you connected the COMPONENT
VIDEO OUT or D1/D2 D-Video jacks to a
progressive scan-compatible TV or monitor.
Make changes to the Component Video setting
in the Setup screen Video 1 menu.
—
—
—
Audio1 Video1 Language General A2 V2
Exit Move
TV Screen
Component Video
S-Video Out
Frame Search
Screen Saver
16:9(Wide)
Progressive
Interlace
Off
Off
SETUP
• Progressive – Use this setting with TVs and
monitors that have progressive scan compo-
nent video inputs. Check the TV’s instruction
manual if you are not sure about this.
• Interlace – (default setting) use this setting
with regular TVs that are not compatible with
progressive scan. Check the TV’s instruction
manual if you are not sure about this.
Tip
If this player is set to output progressive-scan
video, it’s possible that the picture will appear
stretched when playing discs recorded in 4:3
format. This happens when the TV’s aspect ratio
is set ‘Full’. To see the picture in its correct
aspect ratio, change the TV setting to ‘Normal’.
If your TV doesn’t have settings to change the
aspect ratio of the picture, set this player to
16:9(Compressed).
Note
If you connect a TV that is not compatible
with a progressive scan signal and choose one
of the progressive scan settings, you will not
be able to see any picture at all. With your TV
connected using either the composite or S-
Video terminals, choose the Interlace setting in
the Component Video menu.
Compatibility of this unit with progressive-
scan TVs.
‘CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DIS-
PLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE “STANDARD
DEFINITION” OUTPUT. IF THERE ARE QUES-
TIONS REGRADING OUR TV SET COMPATIBIL-
ITY WITH THIS MODEL 525p DVD PLAYER,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
“480P (525P) DVD PLAYER is compatible with
the following Pioneer displays and monitors.”
PLASMA DISPLAY (U.S. model)
• PDP-5030HD • PRO-1000HD
• PDP-4330HD
PROJECTION MONITOR RECEIVER
• PRO-720HD • PRO-620HD • PRO-520HD
• SD-643HDS • SD-533HDS