Pioneer DV-S733A - Manual (Page 27)

27
En
5 Playing Discs
Î
DVD PLAYER
PAUSE STOP
PROGRAM
0 9 8 7
+10 6 5 4
C 3 2 1
CLEAR
ENTER
8 7
PLAY
3
Making a program list
This feature lets you program the play order of titles/groups/
chapters/tracks on a disc. You make a program list via an on-
screen display, using the cursor buttons to navigate and the
number buttons to enter titles/chapters/tracks.
Note that programmed playback is not available for DVD-RWs.
1 Press PROGRAM.
Exit Move Play
Current: Title
Title
Program Memory — Off
7
1
Chapter
(Chapter 1~18)
1
Program Chapter Program Title
PROGRAM ENTER Exit Move Play
Current: Title
Program Memory — Off
2(/20)
Program Chapter Program Title
PROGRAM ENTER
2 Move the Joystick left/right to select ‘Program Chapter’ or
‘Program Title’.
3 Move the Joystick down to the program list window.
If you selected Program Chapter, move the Joystick up and enter a
title number (all the programmed chapters will come from this title).
4 Enter the title/chapter numbers for your program list.
For titles/chapters 1–9, use the corresponding number buttons. For 10
and over, use the +10 button (+10, +10, 4 for 24, etc.)
• You can program a pause instead of a title/chapter: press
8 instead of
entering a number in the program list. (A pause can't be the first or
last step in the list.)
• A program list can contain up to 24 steps.
5 If you want to save the program list, move the Joystick down to
‘Program Memory’ and set it to ‘On’.
Exit Move
Current: Title
Title
Program Memory On
7
1
09 07 18
Chapter
(Chapter 1~18)
1
Program Chapter Program Title
Off
PROGRAM ENTER Select
If you do this, the program list is automatically recalled when you next
load the disc.
• You can save program lists for up to 24 discs.
• After setting to On, move the cursor back up to the program list
window.
Note
This remote is for the DV-
S733A. The buttons are the
same for the DV-47A.