Pioneer DV-S733A - Manual (Page 24)

24
En
Playing Discs 5
Using the Multi Dial
You can use the Multi Dial to control fast
and slow motion scanning and frame
advance of DVD-Video, DVD-R/RW and
Video CDs.
When scanning, no audio is output, even
when the scanning speed is 1/1 (normal
playback speed).
• To start scanning playback at 1/16
speed, turn the MULTI DIAL (clockwise
for forward; anticlockwise for reverse)
during playback.
• Turn the MULTI DIAL in the same direction
to increase the scan speed—the speed is
indicated at the top left of the screen.
• Turn in the opposite direction to slow the
scan speed/reverse direction.
• To start high-speed scanning, turn the
MULTI DIAL quickly (clockwise for
forward; anticlockwise for reverse)
during playback.
• Change the speed/direction in the same way
as above.
• To resume normal playback, press
3.
• To start manual scanning, press JOG
MODE, then use the MULTI DIAL to
advance frames in either direction.
To switch off jog mode, press JOG MODE
again. The picture remains paused until you
restart playback.
• To resume normal playback, press
3.
Note
You can scan Video CDs in the same way as
DVD-Video discs (see above). However, reverse
slow-motion scanning is not possible, and
there are just two fast scanning speeds.
Note
PAL displays 25 frames per second, numbered
0-24. NTSC displays 30 frames per second,
numbered 0-29. The Frame Search option in
the Video menu must be On to use this.
Press DISPLAY while a still picture is displayed
to see the frame number.
Depending on the disc, it may not be possible
to search for a specific frame. Also, when using
frame advance, forward step or reverse step.
Each frame may not be appear in exact order
when stepping through them. The number
assigned to a specific frame may be different
when stepping through the frames in forward
or reverse mode.