Polycom DOC2237A User Manual
Page 44
Advertising
Chapter 2 - Hardware Installation
2-24
6.
Once the Main Control Module, the power supply module and the boards
are removed, unscrew the side screws from inside the MGC-50, and then
remove the plate from both MGC-50 sides.
7.
From the inside of the MGC-50, screw the mounting bracket to the side
of the MGC-50, securing the screws in the mounted nuts.
Front
Rear
Remove
plate
Screw mounting
plate from the
inside of the MGC
(Front)
Advertising