Profoto ACUTE2 1200 - Manual (Page 15)

15
17 19 20
17. Flash head socket (group A)
18. Mains connection
19. Flash head socket(group B)
20. Flash head socket(group B)
Brief instructions
• Check that the voltage you have selected on generator
corresponds with the mains supply voltage
• Check that the modelling lamp has the correct voltage
• Connect flash head/s
• Connect the mains supply cable
• Choose recycling time
• Switch on the POWER
• Switch on modelling light (MOD. LIGHT)
• Choose energy distribution
• Adjust the modelling light
• Press the ready lamp/test button for flash
• Connect sync cable
18