Profoto ACUTE2 1200 - Manual (Page 19)

19
4. Use the dial BRACKET for fine adjustments and to further reduce
the energy by two f-stops.
Three heads
Symmetrical light distribution
1. Connect one head to each socket
2. Set the A+B / A< - >B switch in position A+B. The energy for
the two groups is now added and then equally divided between
the connected heads.
3. Reduce the light output by reducing the energy with A- and B-
switch.
5. Use the dial BRACKET for fine adjustments and to further
reduce the energy by two f-stops.
Asymmetrical light distribution
1. Connect one head to each socket
2. Set the A+B / A< - >B switch in position A< -> B. The energy
for the two groups is now individually controlled.
3. Reduce the energy for the head connected to socket A by one or
two f-stops by halving or quartering the energy with the A-switch.
4. Reduce the energy for the heads connected to sockets B by one
or two f-stops by halving or quartering the energy with the
B-switch. The energy in group B is equally divided between the
two heads.
5. Use the dial BRACKET for fine adjustments and to further
reduce the energy by two f-stops.