Profoto ACUTE2 1200 - Manual (Page 2)

Warning
Profoto generators and lamp heads are parts of a complete
professional lighting system. Please read the instruction
manual carefully before use. Flash tubes and modelling
lamps emit considerable heat and may cause injury if not
handled properly.
Note, always unplug the lamp cable from the generator
before changing the modelling lamp or flash tube.
• Under no circumstances are generators or heads to be
opened.High voltage is inside the equipment.
• Do not touch hot metal parts.
• Do not obstruct ventilation
• Do not connect flash heads with the protective cap in place
When using the flash, do not place filters, diffusing mater-
ials, or any other obstructions directly onto the glass cover,
flash tube or modelling lamp.
Never position the light extremely close to people.
When mounting umbrellas, do not touch the flash tube or
modelling lamp with the metal shaft – risk of high voltage.
Never connect accessories of other brands without consult-
ing an authorised service station.
Service only to be performed by an authorised repair station!
Always use a grounded mains outlet.
Note! Under no circumstances is any part of the equipment
to be opened! The equipment is not user-serviceable and
there is dangerous high voltage inside!