13 the video/audio adjust menu, The video/audio adjust menu, The video/audio adjust menu 13 – Pioneer OPERATING INSTRUCTIONS DVR-920H User Manual
Page 104: Chapter 13
The Video/Audio Adjust menu
13
104
En
Chapter 13
The Video/Audio Adjust menu
Using the Video/Audio Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc
playback, and for recording.
Setting the picture quality for TV and
external inputs
Picture Creation lets you choose a set of picture quality
settings for the built-in TV tuner and for each external
input. There are several preset settings that suit various
sources, or you can create up to three of your own sets.
Choosing a preset
1
With the recorder stopped, press HOME MENU
and select ‘Video/Audio Adjust’.
2
Select ‘Video Adjust’.
3
Use the
/
(cursor left/right) buttons to
change the preset.
• Use the
INPUT SELECT
button to switch between the
built-in TV tuner and the external inputs.
• Use the
CHANNEL +/–
buttons to change the
channel of the built-in TV tuner.
There are six presets available:
•
Tuner
– suitable for general TV broadcasts
•
VCR
– suitable for video cassettes
•
LDP
– suitable for Laserdiscs
•
Memory1
– user preset 1
•
Memory2
– user preset 2
•
Memory3
– user preset 3
You can press
DISPLAY
to see the individual settings for
the current preset.
4
Press ENTER to select the preset.
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings.
1
Follow
Choosing a preset
above and select one of
the user presets (Memory 1, 2 or 3).
2
Select ‘Detailed Settings’.
3
Use the
/
(cursor up/down) buttons to select
the picture quality setting you want to adjust.
You can adjust the following settings:
• Prog. Motion
– Adjusts the motion and still picture
quality when video output is set to progressive.
• PureCinema
– This setting optimizes the picture for
film material when the video output is set to
progressive scan. Usually this is best left set to
Auto
;
try switching to
Off
if the picture appears unnatural.
• Subtitle Adjust
– When the video output is set to
progressive scan, it’s possible that the subtitles in
some movies will disappear unnaturally. In this case
select the
On
setting.
•
3-D Y/C
– Adjusts the brightness/colour separation
(NTSC video only).
• YNR
– Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• CNR
– Adjusts the amount of noise reduction (NR)
applied to the C (colour) component.
•
Detail
– Adjusts how sharp edges appear.
•
White AGC
– Turn on for automatic white level
adjustment.
GUIDE Plus+
Disc Navigator
Copy
Easy Timer
Disc History
Disc Setup
Initial Setup
Video/Audio Adjust
Play Mode
PhotoViewer
Tuner
Detailed Settings
Pr 5
Memory1
Detailed Settings
Pr 5
Memory1
Off
Max
Detail
Motion
Still
3-D Y/C
Subtitle Adjust
Prog. Motion
PureCinema
Fast
Slow
Off
Max
Off
Max
YNR
CNR
Pr 5
Auto
On
DVR-04_HDD_UK.book 104 ページ ２００４年９月１０日 金曜日 午後７時３分