Pioneer OPERATING INSTRUCTIONS DVR-920H - Manual (Page 58)

Playback 06
58
En
Displaying and switching subtitles
Some DVD discs have subtitles in one or more
languages; the disc box will usually tell you which
subtitle languages are available. You can switch subtitle
language during playback. 1 Check the disc packaging for
details of the subtitle options.
To set subtitle preferences, see Subtitle Language on
page 116.
1 Press SUBTITLE repeatedly to select a subtitle
option.
The current subtitle language is shown on-screen and in
the front panel display.
2 To switch off subtitles, press SUBTITLE then
CLEAR.
Switching DVD soundtracks
When playing a DVD disc recorded with two or more
soundtracks (often in different languages), you can
switch the soundtrack during playback. 2 Check the disc
packaging for details of the soundtrack options.
To set audio language preferences, see Audio Language
on page 115.
• Press AUDIO repeatedly to select an audio
soundtrack.
Switching audio channels
For VR mode content recorded with bilingual audio, you
can switch between left (
L ) channel, right ( R ) channel, or
both ( L+R ).
3
When playing Video CDs and audio CDs you can switch
between stereo, just the left channel or just the right
channel.
Note
1 Some discs only allow you to change subtitle language from the disc menu. Press TOP MENU to access.
DVD-Video
SUBTITLE
CLEAR
Subtitle: 1/2 English
The toucan lives in tropical forests
2 • The sound may drop out for a few seconds when switching soundtracks.
• Some discs only allow you to change audio language from the disc menu. Press TOP MENU to access.
• Some discs feature both Dolby Digital and DTS soundtracks. There is no analog audio output when DTS is selected. To listen to the DTS
soundtrack, connect this recorder to a DTS decoder or AV amp/receiver with built-in DTS decoder via the digital output. See
Connecting to an
AV amplifier/receiver on page 19 for connection details.
3 When playing a Bilingual recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot
switch the audio channel. Set Dolby Digital Out to Dolby Digital PCM (see Dolby Digital Out on page 114) or listen via the analog outputs
if you need to switch the audio channel.
DVD-Video
AUDIO
Audio : 1/2 Dolby Digital 2/0CH
VR mode CD Video CD Super VCD WMA/MP3
DVR-04_HDD_UK.book 58 ページ ２００４年９月１０日 金曜日 午後７時３分