Pioneer OPERATING INSTRUCTIONS DVR-920H - Manual (Page 113)

The Initial Setup menu 14
113
En
English
• S-Video – Almost the same quality as RGB, but can
give better results if you are using a long SCART
cable.
• RGB – If your TV is compatible, this setting gives the
best picture quality.
AV2/L1 In
• Default setting: Video
You only need to make this setting if you connected this
recorder to another component using the
AV2(INPUT 1/
DECODER) AV connector.
The AV2(INPUT 1/DECODER) connector input can be
set to one of the following settings:
• Video – Sets the input signal type to composite
video.
• S-Video – Sets the input signal type to S-video.
• RGB – Sets the input signal type to RGB video (See
also Input Line System on page 108).
• Decoder – Use this setting if you are using a decoder
connected to the AV2(INPUT 1/DECODER) input.
(For scrambled channels, make sure that the manual
channel
Decoder setting is set to On —see also
Manual CH Setting on page 110).
NTSC on PAL TV
• Default setting: On
When set to On , NTSC discs (from the U.S., for example)
will play correctly on a PAL-only TV. 1 Change to Off if your
TV is already NTSC-compatible.
Depending on this setting and the Input Line System
setting (see
Input Line System on page 108), the signal
format output when the recorder is stopped varies as
shown in the table below.
Audio In settings
NICAM Select
• Default setting: NICAM
If you want to record the non-NICAM audio in a TV
broadcast, select
Regular Audio , otherwise set to
NICAM . (When set to NICAM , you can still select
Regular Audio using the AUDIO button. See Changing
audio channels on page 33.)
Tuner Level
• Default setting: Normal
Set to Compression if the audio level from the built-in
tuner is excessively high causing distortion.
Note
1 Many recent PAL TVs are capable of correctly displaying NTSC pictures without the need for this setting. Check the manual that came with
your TV if you’re not sure whether yours has this feature.
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Input Colour System
Component Video Out
AV1 Out
AV2/L1 In
NTSC on PAL TV Video
S-Video
RGB
Decoder
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Input Colour System
Component Video Out
AV1 Out
AV2/L1 In
NTSC on PAL TV On
Off
Initial Setup
Input Line System
NTSC on PAL
TV Output when
stopped
625 System Off PAL
On PAL
525 System Off NTSC
On PAL–60
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3) NICAM
Regular Audio
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3) Normal
Compression
Initial Setup
DVR-04_HDD_UK.book 113 ページ ２００４年９月１０日 金曜日 午後７時３分