Pioneer OPERATING INSTRUCTIONS DVR-920H - Manual (Page 31)

Getting started 04
31
En
English
Checking the downloaded data the
following day
1 Press GUIDE.
You should see a grid filled with channel logos and TV
listings information. Use the
/ (cursor up/down)
buttons to review the list. If you notice that there are
channels missing, or that there are channels in the list
that you don’t get, go to the Editor screen:
• Press (cursor up) repeatedly until the Menu bar is
highlighted.
• Press (cursor right) until Editor is highlighted. The
main area of the screen now shows a list of channels.
Those that are turned
ON are displayed in the grid;
those that are OFF are hidden. Use the / / /
(cursor) buttons to move down the list and turn
channels
ON or OFF as necessary.
• For any channel that you turn ON , the GUIDE Plus+
system will need to know how it is received (the
source) and on which program number. The source
may be the built-in tuner of this recorder, or an
external receiver. The program number is the number
on which the channel can be found on its receiving
device/source. The entry in the Editor screen must
match this number for correct recording of that
channel.
• The above is especially important for the ‘host
channel’. Please make sure that the host channel is
always switched
ON .
2 Use the number buttons to change the program
numbers as you like.
3 When you’re done, press the BLUE Action button
(Home) to get back to the GUIDE Plus+ home screen.
• You can find detailed information on using the GUIDE
Plus+ system in the next chapter, Using the GUIDE
Plus+™ electronic program guide on page 40.
Selecting the hard disk or DVD for
playback and recording
The HDD and DVD buttons (remote control and front
panel) are used to select the hard disk (HDD) or DVD for
playback and recording. The indicator in the front panel
display shows which is currently selected.
HDD DVD
DVR-04_HDD_UK.book 31 ページ ２００４年９月１０日 金曜日 午後７時３分