Pioneer OPERATING INSTRUCTIONS DVR-920H - Manual (Page 45)

Using the GUIDE Plus+™ electronic program guide 05
45
En
English
The Schedule Area
The Schedule Area is where you can set, see, edit and
delete scheduled (timer) recordings. (See also
Setting a
timer recording on page 63 for further timer recording
features.)
From the Schedule Area you can:
• Edit or delete a One-Button-Recording.
• Set, edit or delete a VIDEO Plus+ recording.
• Set, edit or delete a manual recording.
Editing a scheduled recording
You can edit any parameter in a scheduled recording, or
delete it if you no longer require it.
1 Highlight the left tile of a scheduled recording.
• If you only want to edit the recording quality,
frequency, destination, timing or group settings, skip
to step
6 below.
2 Press the GREEN Action button (Edit).
3 Use the cursor and number buttons to edit the
recording date, start time, end time and channel.
Use the / (cursor up/down) buttons or the number
buttons to edit.
Press the GREEN Action button to go to continue, or the
RED Action button to go back.
4 Enter a name for the scheduled recording.
Use the / / / buttons followed by ENTER to select
characters from the on-screen keyboard.
After entering the whole name, press the GREEN Action
button to continue.
5 Confirm the changes you’ve made.
Select Save to save your changes, or Don’t Save to exit
without changing anything, then press ENTER .
6 Highlight the right recording tile.
7 Press the RED Action button (Quality) to change
the recording quality.
DVR-04_HDD_UK.book 45 ページ ２００４年９月１０日 金曜日 午後７時３分