Printek 850 Series - Manual (Page 12)

G E T T I N G S T A R T E D
4
GETTING STARTED
This chapter will use the fewest possible steps to get the first time user up
and running quickly. You will be guided through the following steps:
•
Finding a suitable location and installing the printer
•
Setting up a host interface if necessary
•
Installing the ribbon cartridge
•
Loading paper
•
Performing a printer self-test
Installation
Before installation, a suitable site must be chosen. Suitable sites include
offices, computer rooms, and most factory environments. Printek printers
have been designed to be rugged, heavy-duty printers. As such, they will
handle most harsh environments, but should not be placed in direct sunlight
or in areas that will exceed the rated temperature, humidity, or power
requirements. For details, refer to “
SPECIFICATIONS ” on page 92.
Once a site has been selected, the printer should be placed on a countertop,
desk or Printek Printstand.
The printstand should be located in an area large enough to provide easy
access to both the front of the printer and the rear for accessing printed
output. Unpack the printer as described in the “PrintMaster
850/850si/852si Unpacking Instructions” and place the printer on the
printstand or counter top.