Printek 850 Series - Manual (Page 58)

S P E C I F Y I N G F O R M S
5 0
Emulation Emulation
Epson
Possible Values: Epson*, IBM Proprinter,
DEC LA120/LA210, TTY,
Printek, ANSI X3.64, Genicom 3840, Genicom
3410
This item selects the emulation to be used whenever the parallel port is
active. The emulation should be set to match the type of printer your
software supports.
LAN Setup LAN Setup
Off
Possible Values: On, Off*
This item enables or disables the ability to control the optional Ethernet
interface card from the front panel. When set to On, the Serial Interface is
not available, and menu items for the Ethernet card follow. Consult your
Network Administrator before changing any of these items.
Note: Setting this item to On when the optional Ethernet interface card is
not present may result in the printer appearing to “hang” when exiting the
Setup Menus. After 15 seconds, a LAN Timeout error will be
displayed. Press ONLINE, then enter the Setup Menus and correct the
problem.
IP Address Method IP Address
Auto
Possible Values: Auto*, Static
This item controls how the optional Ethernet interface card receives its
network address. When set to Auto, the Ethernet card will receive its
network address from a network DHCP server (typical installation). When