Printek 850 Series - Manual (Page 67)

S P E C I F Y I N G F O R M S
5 9
TEST MENU
The TEST MENU is used to access some testing as well as some record
keeping items. To access the test menu, enter Setup and press the MENU
button until TEST MENU is displayed as shown below.
TEST MENU
Next press the ALIGN/ITEM button to access the test modes available.
Print the Menus Print the
Menus
No
Possible Values: No*, Current Values
This item may be used to print a list of current values.
Current Values will print only the items relevant to the current
printer configuration and their current values. This provides a means of
record keeping or “backup”, so that the values can be checked and
restored in case an operator inadvertently changes one.
After setting this value, close lid and press ONLINE to begin printing. After
printing is completed, the value of this item will automatically return to No.
Note that once printing begins, taking the printer off line for any reason
(ONLINE button pressed, ribbon lid opened, or a paper fault) will cause
printing to be aborted.
Test Mode Test Mode
Off
Possible Values: Off*, Barber Pole,
Hex Dump,
Demos