Printek 850 Series - Manual (Page 31)

D A I L Y O P E R A T I O N
2 3
LOAD/FEED
This button performs a number of different form
feeding functions. The printer will automatically
select the correct function to perform based upon
the current position of the form.
LOAD:
•
Loads the form that is presently selected.
If the selected form is already recognized as
“loaded” in the tractors, the printer will
advance the form to the print position.
If the selected form is not currently
considered to be loaded in the tractors
(display shows
< Not Loaded > ) , this
button will change the status of this form to
“loaded”.
FORM FEED:
•
If a form is currently loaded and perhaps
partially printed, this button will advance the
bottom of the current form to the tear bar so
that it may be torn off.
•
If a form has already been advanced to the
tear bar, this button will advance the next
form to the tear bar.
UNLOAD/CHANGE
This button is used to access up to ten different
forms, which have been previously configured
with the Setup menus (see the chapter on
“
PRINTER CONFIGURATION ” for more
information).
When this button is pressed, one of two functions
will be performed.