Printek 850 Series User Manual
Page 29
D A I L Y O P E R A T I O N
2 1
ONLINE Status
Indicator LED
This is a multicolored LED which is used to
display the following information:
Green:
The printer is on line and ready to print.
Flashing Green:
The printer is in the process of going back on
line. Typically occurs after a new form has been
loaded while the printer is confirming which forms
are loaded in the tractors.
Flashing Red:
The printer is currently off line and cannot print.
This may be due to the operator taking the printer
off line or the printer may have detected an error
condition, such as running out of paper, which
requires operator intervention. If due to an error
condition, the cause of the error will periodically
be shown on the LCD display. After the cause
of an error condition has been resolved, press the
ONLINE button to clear the error. This will also
place the printer back on line and allow printing
to resume.
Yellow:
The printer is in the process of exiting the Setup
mode and saving Setup values, or the printer is
currently busy performing an operation with the
optional Setup Module.
Flashing Yellow:
The user has pressed the MENU button and
entered the Setup mode (may be exited by
pressing the ONLINE button after the desired
changes have been made). For more
information, see the chapter on “
PRINTER
CONFIGURATION”.