Maintenance and troubleshooting – Printek 850 Series User Manual

Page 71

Advertising
background image

63

MAINTENANCE AND
TROUBLESHOOTING

Error Messages

This section provides a partial list of fatal errors. Fatal errors typically
cannot be recovered from without the loss of data. In each case,

ERROR

is

shown on the top line of the display and alternated with one of the following
messages. Suggested solutions for each of these messages are listed to the
right of each error message in the table, which follows. To restart the
printer after a fatal error, press the ONLINE button. The printer will reset to
the power-on state and any pending print data in the printer buffer is lost.
If the suggested solution does not solve the problem, please refer to
“Obtaining Service” on page 64.

Note that none of these messages flash on the display. Messages which are
flashed on the display are discussed in the “

Common Error Conditions

section on page 31.

Other errors which are not listed here or in “

DAILY OPERATION

” should be

reported to the company where you purchased your printer, or to your
nearest Authorized Service Center. If you do not know the name or
number of your nearest Authorized Service Center, see “

Obtaining

Service

” later in this section.

Advertising