Panasonic KX-TG2584S - Manual (Page 15)

Preparation
15
For assistance, please call: 1-800-211-PANA(7262)
Dialing Mode (Cordless\Handset)
You can program the dialing mode using the cordless handset near the
base unit. If you have touch tone service, set to “Tone”. If rotary or pulse
service is used, set to “Pulse”. Your phone comes from the factory set to
“Tone”.
Make sure the base unit and cordless handset are not being used.
1 Press (MUTE/FUNCTION) .
2 Scroll to “ Program ” by pressing (›) or (‹) .
3 Press (fl) ( Yes key).
4 Scroll to “ Set dial mode ” by pressing
(›) or (‹) .
5 Press (fl) ( Yes key).
6 Select “ Pulse ” or “ Tone ” by pressing (›)
or (‹) .
7 Press (fl) ( Save key).
≥ A beep sounds.
≥ To exit the programming mode, press
(OFF)
.
≥ You can exit the programming mode any time by pressing (OFF) .
1 Save directory
Ringer volume
43 1 =Yes
LCD contrast
1 Program
43 1 =Yes
1 Set flash time
Set line mode
43 1 =Yes
1 Set dial mode
Auto talk
43 1 =Yes
Dial mode
:Tone
43 1 =Save
Dial mode
:Pulse
43 1 =Save
Dial mode
:Pulse
“