Panasonic KX-TG2584S - Manual (Page 25)

25
For assistance, please call: 1-800-211-PANA(7262)
Preparation
“
Flash Memory Message Backup
Messages are stored on a “flash memory” IC chip and will not be
affected by power failures. All messages are saved until you erase
them.
To check the recorded greeting message
1 Press (FUNCTION/EDIT) .
2 Scroll to “ Set answering ” by pressing
(›) or (‹) .
3 Press (fl) ( Yes key).
4 Scroll to “ Greeting check ” by pressing
(›) or (‹) .
5 Press (fl) ( Yes key).
≥ The recorded message will start to being played.
To erase the recorded greeting message
Press (CLEAR/ERASE) while the message is being played.
≥ The unit will answer a call with a pre-recorded greeting.
Pre-recorded greeting message
If you do not record a greeting message (p. 23), one of two messages will
be played when a call is received, depending on the caller’s recording
time (p. 26).
≥ A pre-recorded greeting will be played as follows:
∫ When the recording time is set to “1 minute”, “2 minutes” or
“3 minutes”:
“Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call.”
∫ When the recording time is set to “Greeting only”:
“Hello, we are not available now. Please call again. Thank you for your call.”
1 Date and time
Save DIRECT#
43 1 =Yes
LCD contrast
1 Set answering
43 1 =Yes
1 Greeting record
Greeting check
43 1 =Yes
Greeting record
1 Greeting check
43 1 =Yes
Greeting check
00-00