Panasonic KX-TG2584S - Manual (Page 41)

41
Cordless Telephone
Storing Caller List Information in the
Directory
(Cordless\Handset)
You can store phone numbers that are in the Caller List into the directory.
Storing must be carried out with the cordless handset.
Make sure the base unit and cordless handset are not being used.
1 Press (›) or (‹) to enter the Caller List.
2 Scroll to the caller you want to store in
the directory by pressing
(›) or (‹) , and
press (fl) .
≥ If the number requires editing, see page 37.
3 Scroll to “ Save directory ” by pressing
(›) or (‹) , and press (fl) ( Yes key).
If there is no name information for the
caller, “
Enter name ” will be displayed.
a) If a name is not required, press (›) ( Next
key) and (fl) ( Save key).
b) If a name is required, enter the name
(p. 46). When finished, press (›) ( Next
key) and (fl) ( Save key).
≥ A beep sounds.
≥ To continue storing other items, repeat from
step 2.
≥ To exit the programming mode, press (OFF) .
≥ You can exit the programming mode any time by pressing (OFF) .
≥ If the display shows “ Directory full ” in step 3, press (OFF) to exit the list.
To erase other stored items from the directory, see page 51.
≥ After the maximum of 50 items has been stored, “ Directory full ” is also
displayed.
≥ You cannot store caller information in the directory if a phone number is not
displayed.
≥ If 3 beeps sound and display shows “ Save error ” in step 3, move closer to the
base unit and start again from step 2.
TURNER,CINDY
1-234-456-7890
11:20A JUN.12
a 3
Edit
1 Save directory
43 1 =Yes
10 new calls
43 1 =Directory
Enter name
21 4 =Next
Enter name
CINDY TURNER
21 4 =Next
CINDY TURNER
1-234-456-7890
3 =Edit 1 =Save
1 Edit
Save directory
43 1 =Yes
“
For assistance, please call: 1-800-211-PANA(7262)