Panasonic KX-TG2584S - Manual (Page 27)

27
For assistance, please call: 1-800-211-PANA(7262)
Preparation
Number of Rings (Base\Unit)
You can select the number of times the unit rings before the answering
system answers a call, from “2” to “7” or “Toll saver”*.
Your phone comes from the factory set to “4”.
Make sure the base unit and cordless handset are not being used.
1 Press (FUNCTION/EDIT) .
2 Scroll to “ Set answering ” by pressing
(›) or (‹) .
3 Press (fl) ( Yes key).
4 Scroll to “ Number of rings ” by pressing
(›) or (‹) .
5 Press (fl) ( Yes key).
≥ The current setting is displayed.
6 Select the number of rings by pressing (›)
or (‹) .
≥ You can also select the number of rings by
pressing dialing buttons
(2)
to
(7)
or
(0)
(Toll
saver*).
7 Press (fl) ( Save key).
≥ A beep sounds.
≥ To exit the programming mode, press
(EXIT/STOP) .
≥ You can exit the programming mode any time by pressing (EXIT/STOP) .
*Toll saver
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
1 Date and time
Save DIRECT#
43 1 =Yes
LCD contrast
1 Set answering
43 1 =Yes
Remote code
1 Number of rings
43 1 =Yes
Number of rings
:4
43 1 =Save
Number of rings
:2
43 1 =Save
Number of rings
:2
1 Greeting record
Greeting check
43 1 =Yes