Precor MOVE BEYOND 9.23 - Manual (Page 10)

Owner’s Manual: Treadmill Safety Features 8
Using the Handrails
To maintain your balance, always grasp a handrail when
you step on or off the treadmill, and when you use the
keypad.
To learn more about the touch-sensitive handrail grips,
refer to Heart Rate Features.
Turning the Unit On and Off
To turn the unit On and Off, use the power switch located
at the front of the unit, near the power cord connection.
Refer to Diagram 4.
Important: When it is not being used, turn the unit Off.
Diagram 4: Power switch
Using the Reset Switch
The treadmill contains a circuit breaker that trips if it
detects overload conditions. To protect the lower
electronic boards from damage, a red button, near the
power switch, must be pressed to reset the circuit breaker.
For more information, refer to Advanced Programming and
Troubleshooting.
Location
To prevent damage to the lower unit, locate your treadmill
away from heating ducts. For safety and maintenance
purposes, it is important to keep the area around the
treadmill open and free from encumbrances such as other
equipment. The minimum space requirement needed for
user safety and proper maintenance is three feet wide by
six feet deep (one meter wide by two meters deep),
directly behind the running belt.
Power switch
92x_Owners Manual.book Page 8 Tuesday, April 22, 2008 8:18 AM