Precor MOVE BEYOND 9.23 - Manual (Page 29)

Owner’s Manual: Workout Options 27
Selecting a USER Key
To start your exercise session using personal identification
and preferences set up in Adding a User, take the
following steps:
1. At the banner, press the same USER key you
designated in step 1, Adding a User.
Note: Refer to User Identification if you have not
previously chosen a USER key.
The last program associated with the USER key
appears. User preferences such as time, weight, and
age are re-instated.
The time or distance goal associated with the displayed
program also applies.
2. Press ENTER to select the program being displayed or
choose another program using the arrow or the
PROGRAMS keys. Refer to Selecting a Program for
information about how to choose a program.
Important: If you make an entry error, press STOP/
HOLD TO RESET or wait 30 seconds to return to the
banner.
BELT STARTING scrolls across the display. A
3-second countdown appears and then the running
belt starts moving.
3. Step on to the running belt with the speed at or below
1 mph or 1 kph and begin exercising. Use the SPEED
arrow keys to increase or decrease the speed of the
running belt.
92x_Owners Manual.book Page 27 Tuesday, April 22, 2008 8:18 AM