NEC LT380 - Manual (Page 26)

16
AUDIO
IN
PC CARD
COMPONENT IN
USB LAN
AUDIO IN
COMPUTER 3 IN
COMPUTER 1 IN COMPUTER 2 IN
PC CONTROL MONITOR OUT AUDIO OUT S-VIDEO IN VIDEO IN AUDIO IN
Cb/Pb
L/MONO R
Y Cr/Pr
AC IN
AUDIO OUT
PHONE
MONITOR OUT
2. Installation and Connections
Connecting an External Monitor
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog
image you're projecting.
NOTE:
• The MONITOR OUT connector will output no sound when the projector is in standby mode.
• The MONITOR OUT connector will output no signal when [Power-saving] is selected in [Standby Mode] from the menu.
• When the projector is in the standby mode, the image may not be correctly displayed while the cooling fans are running immedi-
ately after turning on or off the power.
• The AUDIO OUT jack cannot be used as a headphone jack.
• Output sound level can be adjusted in accordance with the sound level.
• When audio equipment is connected, the projector speaker is disabled.
• Daisy chain connection is not possible.
VGA signal cable (supplied)
VGA signal cable (not supplied)
Audio cable (not supplied)
Audio cable (not supplied)