NEC LT380 - Manual (Page 32)

22
2. Installation and Connections
PC Card Type
The PC Card slot accepts PCMCIA Type II only.
NOTE: The projector does not support NTFS formatted flash memory card or USB memory device.
Be sure to use a flash memory card or USB memory device formatted with the FAT32, FAT16 or FAT file system.
To format your flash memory card or USB memory device in your computer, refer to the document or help file that comes with your
Windows operating systems.
PC C ARD CO MPO NENT IN
USB
LAN
AU DIO IN COMP UTER 3 IN
COM PUTER 1 IN
COM PUTER 2 IN
PC C ONT ROL
MON ITOR OUT
AU DIO OUT
Cb/P b
L/M ONO
R
Y
Cr/P r
S-VIDEO IN
VIDEO IN
AUDIO IN
AC IN
PC C ARD LAM P STA TUS POW ER
ON/S TAN D B Y
SO URC E
AUTO AD JUS T
3D REFOR
M
Eject button
Removing the PC Card
1. Make sure that the PC CARD access indicator is not lit. (This
step is needed only when the PC memory card being inserted
into the projector’s PC CARD slot.)
NOTE: The PC CARD access indicator lights while its data is being accessed.
2. To remove the wireless LAN card, make sure that the main power
is off. (This step is needed only when the wireless LAN card be-
ing inserted into the projector's PC CARD slot)
3. Press the eject button. The PC card pops out a little. Grasp the
edges of the PC card and pull it out.