Setting a password [menu lock] / [logo lock – NEC LT380 User Manual

Page 90

Advertising
background image

80

6. Using On-Screen Menu

Setting a Password [Menu Lock] / [Logo Lock]

A password can be set for your projector to avoid operation by an unauthorized person.
When [Menu Lock] is set, changing the menu from Basic to Advanced will display the Password input screen.

When [Logo Lock] is set, doing any one of the following two operations will display the Password input screen.

Changing the background either from or to [Logo]

Changing the logo data in a PC card or USB memory.

[Entry]

To assign your password:

NOTE: Up to 15 alphanumeric characters can be assigned.

1. Type a password.

Select [On] and press the ENTER button.

The [Enter the Password] screen will be displayed.

Make sure that is highlighted and then press the ENTER button.

The Software keyboard appears. Use the Software keyboard to type a password and then highlight [OK] on
the [Enter the Password] screen and press the ENTER button.

The [Confirm Password] screen will be displayed.

2. Type the same password again. Highlight [OK] on the [Enter the Password] screen and press the ENTER

button.

Your password will be assigned.

[Delete] :
To delete your password:

1. Select [Off] and press the ENTER button. The [Current Password] screen will be displayed.

2. Use the Software keyboard to type your password. Highlight [OK] on the [Current Password] screen and

then press the ENTER button.

Your password will be deleted.

Advertising