NEC LT380 - Manual (Page 57)

47
4. Convenient Features
¸ Using a USB Memory Device
The projector is compatible with a USB memory device which sup-
ports the viewer and security features.
• To use a USB memory device, connect the device to the USB
port (type A).
• Select one of the drive icons for your USB memory in a pane on
the left side of the Viewer window.
• To use a USB memory device as a Protect key for Security func-
tion, select one from the Drive icons in the Security setting screen.
(
→ page
82 )
NOTE:
• Use commercially available USB memory devices. Some USB memory devices (brands) may not work. See our website for
available USB memory devices:http://www.nec-pj.com
• The projector does not support NTFS formatted flash memory card or USB memory device.
Be sure to use a flash memory card or USB memory device formatted with the FAT32, FAT16 or FAT file system.
To format your flash memory card or USB memory device in your computer, refer to the document or help file that comes with
your Windows.
• You cannot use a USB memory device when connecting a USB mouse to the projector.
• Do not do the following while the USB memory device’s access indicator is lit or flashing (while data is being accessed.) Doing so
can damage your USB memory device. Back up your data in case it will need to be restored.
* Pulling out the USB memory device from the USB port of the projector.
* Turning off the main power switch or unplugging the power cable.
• The drive for ”USB 1-4” is displayed only when the USB memory device is connected to the projector.
• Some USB memory devices (brands) cannot be used as Protect key for the projector’s Security function.
CAUTION: Do not insert a USB memory device into the LAN port (RJ-45). Doing so can cause damage to the LAN
port (RJ-45).
PC CARD
COMPONENT IN
USB LAN
AUDIO IN
COMPUTER 3 IN
COMPUTER 1 IN COMPUTER 2 IN
PC CONTROL MONITOR OUT AUDIO OUT S-VIDEO IN VIDEO IN AUDIO IN
Cb/Pb
L/MONO R
Y Cr/Pr
AC IN