NEC LT380 - Manual (Page 43)

33
OFF
VIDEO
S-VIDEO
VIEWER
LAN
COMPUTER
COMPONENT
ON
SELECT
POWER POWER
MENU
EN
TER EX IT
3
1 2
º Turning off the Projector
To turn off the projector:
3. Projecting an Image (Basic Operation)
1. Press the POWER (ON/STAND BY) button on the projector
cabinet or the POWER OFF button on the remote control. The
[Power Off / Are you sure?] message will appear.
2. Press the ENTER button or the POWER (ON/STANDBY) or
the POWER OFF button again.
The power indicator will glow orange. After the projector turns
off, the cooling fans keep operating for 30 seconds (Cooling-off
time).
NOTE: Immediately after turning on the projector and displaying an im-
age, you cannot turn off the projector for 60 seconds.
3. Turn off the Main Power switch. The power indicator will go
out.
CAUTION
Do not unplug the power cable from the wall outlet or do
not turn off the main power under any one of the following
circumstances.
Doing so can cause damage to the projector or PC card:
• While the projector lamp is lighted.
• While the cooling fans are running. (The cooling fans continue
to work for 30 seconds after the projector is turned off).
• While the PC CARD Access Indicator lights. Doing so can dam-
age your PC memory card.
¾ After Use
Preparation: Make sure that the main power is turned off.
1. Unplug the power cable.
2. Disconnect any other cables.
3. Retract adjustable tilt feet if extended.
4. Cover the lens with the lens cap.
5. Put the projector and accessories in the supplied soft case.
NOTE: Before putting the projector in the soft case, be sure to retract the feet. Failure to do so may cause the damage to the projector.
POWER ON/STAND BY
PC CARD
LAMP
STATUS
SOURCE AUTO ADJUST ORM
PC C ARD COM PON ENT IN
USB
LAN
AUD IO IN COM PUT ER 3 IN COM PUT ER 1 IN
COM PUT ER 2 IN
PC CO NTR OL
MO NIT OR O UT
AUD IO O UT
S-VI DEO IN VID EO IN
AUD IO
Cb/P b
L/M ONO R
Y
Cr/P r
AC I N
PC C ARD LAM P STA TUS POW ER
ON/S TAN D B Y
SOU RCE
AUT O A DJU ST
3D R EFO RM
SELE CT
PC CARD
LAMP
STATUS
POWER
OFF
VIDEO
S-VIDEO
VIEWER
LAN
COMPUTER
COMPONENT
ON
SELECT
POWER POWER
MENU
EN
TER EX IT
3
1 2
POWER ON/STAND BY
PC CARD
LAMP
STATUS
SOURCE AUTO ADJUST ORM