NETGEAR MR814 v3 - Manual (Page 135)

Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Preparing Your Network C-23
202-10039-01
Restarting the Network
Once you’ve set up your computers to work with the firewall, you must reset the network for the
devices to be able to communicate correctly. Restart any computer that is connected to the firewall.
After configuring all of your computers for TCP/IP networking and restarting them, and
connecting them to the local network of your MR814 v3 router, you are ready to access and
configure the firewall.