NETGEAR MR814 v3 - Manual (Page 18)

Reference Manual for the MR814 v3 Cable/DSL Wireless Router
2-4 Introduction
202-10039-01
• Automatic Configuration of Attached PCs by DHCP
The MR814 v3 router dynamically assigns network configuration information, including
IP, gateway, and domain name server (DNS) addresses, to attached PCs on the LAN using the
Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies configuration
of PCs on your local network.
• DNS Proxy
When DHCP is enabled and no DNS addresses are specified, the router provides its own
address as a DNS server to the attached PCs. The router obtains actual DNS addresses from
the ISP during connection setup and forwards DNS requests from the LAN.
• PPP over Ethernet (PPPoE)
PPPoE is a protocol for connecting remote hosts to the Internet over a DSL connection by
simulating a dial-up connection. This feature eliminates the need to run a login program such
as Entersys or WinPOET on your PC.
Easy Installation and Management
You can install, configure, and operate the MR814 v3 Cable/DSL Wireless Router within minutes
after connecting it to the network. The following features simplify installation and management
tasks:
• Smart Wizard Configuration Assistant
A user-friendly Smart Wizard configuration assistant that automatically connects you to the
router, detects the type of Internet connection you have, and guides you through enabling your
wireless network.
• Browser-based management
Browser-based configuration allows you to easily configure your router from almost any type
of personal computer, such as Windows, Macintosh, or Linux. A user-friendly Setup Wizard is
provided and online help documentation is built into the browser-based Web Management
Interface.
• Smart Wizard
The MR814 v3 router automatically senses the type of Internet connection, asking you only
for the information required for your type of ISP account.
• Visual monitoring
The MR814 v3 router’s front panel LEDs provide an easy way to monitor its status and
activity.