NETGEAR MR814 v3 - Manual (Page 50)

Reference Manual for the MR814 v3 Cable/DSL Wireless Router
4-10 Wireless Configuration
202-10039-01
How to Configure WEP
To configure WEP data encryption, follow these steps:
1. Log in to the MR814 v3 firewall at http://www.routerlogin.net with its default user name of
admin and default password of password, or using whatever LAN address and password you
have set up.
2. Click Wireless Settings in the main menu of the MR814 v3 firewall.
3. From the Security Options menu, select WEP. The WEP options display.
Figure 4-5. Wireless Settings encryption menu
Note: If you use a wireless computer configure WEP settings, you will be disconnected
when you click on Apply. You must then either configure your wireless adapter to match
the router WEP settings or access the router from a wired computer to make any further
changes.