NETGEAR MR814 v3 - Manual (Page 33)

Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Connecting the Router to the Internet 3-9
202-10039-01
Overview of How to Access the Router
The table below describes how you access the router, depending on the state of the router.
Table 3-1. Ways to access the router
Router State Access Options Description
Factory Default
Note: The router is
supplied in the
factory default
state. Also, t
he
factory default state
is restored when you
use the factory reset
button. See
“Restoring the
Default
Configuration and
Password” on page
8-7
for more
information on this
feature.
Automatic Access via
the Smart Wizard
Configuration
Assistant Any time a browser is opened on any computer connected to
the
router , the router will automatically connect to that
browser and display the Configuration Assistant
welcome page.
There is no need to enter the router URL in the browser,
or provide the login user name and password.
Manually enter a URL
to bypass the Smart
Wizard Configuration
Assistant You can bypass the Smart Wizard Configuration Assistant
feature by typing
http://www.routerlogin.net/basicsetting.htm
in the browser address bar and clicking Enter. You will not be
prompted for a user name or password.
This will enable you to manually configure the router even
when it is in the factory default state. When manually
configuring the router, you must complete the configuration
by clicking Apply when finished entering your settings. If you
do not do so, a browser on any PC connected to the router
will automatically display the router's Configuration Assistant
Welcome page rather than the browser’s home page.
Configuration
Settings Have
Been Applied Enter the standard
URL to access the
router
Connect to the router by typing either of these URLs in the
address field of your browser, then click Enter:
•
http://www.routerlogin.net
• http://www.routerlogin.com
The router will prompt you to enter the user name of admin
and the password. The default password is password.
Enter the IP address
of the
router to
access the
Connect to the router by typing the IP address of the router in
the address field of your browser, then click Enter.
192.168.0.1 is the default IP address of the router. The router
will prompt you to enter the user name of admin and the
password. The default password is password.