NEC NP3151W User Manual
Page 108
94
6. Using On-Screen Menu
Setting a new program timer
1. On the PROGRAM TIMER screen, use the SELECT
or button to select [SETTINGS] and press the EN-
TER button.
The [PROGRAM LIST] screen will be displayed.
NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.
2. Select a blank program number and press the ENTER button.
The [EDIT] screen will be displayed.
3. Make settings for each item as required.
ACTIVE..............................Place.a.check.mark.to.enable.the.program.
DAY....................................Select.days.of.the.week.for.the.program..To.execute.the.program.from.Monday.to.Friday,.select.
[MON-FRI].To.execute.the.program.in.everyday.basis,.select.[EVERYDAY].
TIME..................................Set.the.time.to.execute.the.program..Enter.time.in.24-hour.format.
FUNCTION.........................Select.a.function.to.be.executed..Selecting.[POWER].will.allow.you.to.turn.on.or.off.the.projector.
by.setting.[ADVANCED.SETTINGS]..Selecting.[SOURCE].will.allow.you.to.select.a.video.source.by.
setting.[ADVANCED.SETTINGS].
ADVANCED.SETTINGS.......Select.power.on/off.or.a.type.of.video.source.for.the.selected.item.in.[FUNCTION].
REPEAT..............................Place.a.check.mark.to.repeat.the.program.continuing.basis..To.use.the.program.this.week.only,.
clear.the.check.mark.