NEC NP3151W - Manual (Page 8)

vi
Important Information
About High Altitude mode
• Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 me-
ters or higher.
Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTI-
TUDE] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple
minutes and turn on the projector.
• Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE]
can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].
• Using the projector at altitudes approximately 5500 feet/1600 meters or higher can shorten the life of optical
components such as the lamp.
USB Wireless LAN Unit
Cautions on Usage
Warning
• The USB Wireless LAN Unit is not meant for use with facilities or equipment involving the safeguard of
human life, such as medical equipment, nuclear facilities or equipment, aeronautical or space equipment,
transportation facilities or equipment, etc., or with facilities or equipment requiring high levels of reliability. Do
not use the USB Wireless LAN Unit in such cases.
• Do not use the USB Wireless LAN Unit near cardiac pacemakers.
• Do not use the USB Wireless LAN Unit near medical equipment. Doing so may cause electromagnetic inter-
ference with the medical equipment, possible leading to death.
• Do not disassemble or modify the USB Wireless LAN Unit in any way. Doing so could lead to fire or electric
shock.
• Do not use the USB Wireless LAN Unit in wet or moist places, such as in bathrooms or near humidifiers. Do-
ing so could lead to fire, electric shock or malfunction.
Caution
To prevent damage due to static electricity, eliminate any static electricity from your body before touching the
USB Wireless LAN Unit.
• Static electricity from the human body may damage the USB Wireless LAN Unit. Before touching the USB
Wireless LAN Unit, touch an aluminum sash, a door knob, or some other metal object around you to elimi-
nate the static electricity.
Caution
The radio waves used by the USB Wireless LAN Unit pass through the wood or glass used in normal homes
(but not through window panes with built-in metallic mesh).
The radio waves do not pass through iron reinforcing bars, metal or concrete, however, so the USB Wireless
LAN Unit cannot be used for communicating through walls or floors made with these materials.