NEC NP3151W - Manual (Page 120)

0
6. Using On-Screen Menu
[WIRELESS]
PROFILES (for USB Wireless LAN unit):
To execute a wireless LAN easily using Image Express Utility 2.0, select [EASY CONNECTION].
Up to two settings for the USB wireless LAN unit can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the [WIRELESS] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.
Select [OK] and press the ENTER button.
DHCP:
Place a check mark to automatically assign an IP address to the projector from your DHCP server.
Clear this check box to register the IP address or subnet mask number obtained from your network administrator.
IP.ADDRESS........... Set.your.IP.address..Press. .to.display.the.software.keyboard.and.type.in.12.numeric.characters.
SUBNET.MASK....... Set.your.subnet.mask.number..Press. .to.display.the.software.keyboard.and.type.in.12.numeric.characters.
GATEWAY............... Set.the.default.gateway.of.the.network.connected.to.the.projector..Press. .to.display.the.software.keyboard.
and.type.in.12.numeric.characters.
DNS.CONFIGURATION... Type.in.the.IP.address.of.DNS.server.on.the.network.connected.to.the.projector..Twelve.numeric.charac-
ters.are.used.
ADVANCED............. Displays. the. Advanced. menu. which. includes. various. setting. for. wireless. LAN. connection. (NETWORK.
TYPE.and.SECURITY)..See.the.Advanced.menu.later.on.
RECONNECT........... Use.this.button.to.retry.to.connect.the.projector.to.a.network..Try.this.if.you.have.changed.[PROFILES].
NOTE: If you select [EASY CONNECTION] from [PROFILES], you cannot make settings to DHCP and its following items except
[CHANNEL] in [ADVANCED].